About Inflatable Tent

Inflatable tent is a type of tent that uses the principles of structural mechanics to design a framework. It utilizes the gas pressure characteristics to expand the airbags into a rigid column, which is then organically combined to support the framework of the tent. Inflatable tents, also known as closed air tents, can be inflated once and used continuously.

Details

Fabric material: Oxford cloth, PVC coated cloth

Inflatable column material: PVC coated polyester cross woven fabric

Adaptation temperature: -40 ° -+65 °

Framework wind resistance: 6-8 levels

Hydrostatic pressure: Hydrostatic pressure ≥ 16kpa

Ground defense surface water: 160-200mm

Inflation time: 2-10min (varies with tent size)

Advantage

It has the advantages of fast molding, high strength, flame resistance, mold resistance, UV resistance, moisture resistance, lightweight, small folded volume, and easy portability

Purpose

Field construction operations, camping training, temporary clubs, sports and entertainment venues and military command posts, field hospitals, disaster relief, camping, leisure, tourism, mobile catering, dining tents, and other places

Frequently asked questions

Q: What should I do if an inflatable tent leaks air?

Answer: If you find any air leakage, you can first wipe the air column clean, and then apply soap and water to the surface to check the leakage point. If the leakage point is a very small hole, you can use a small piece of circular repair fabric (standard in any size of inflatable tent), then brush some glue, and after the glue dries (important, it must wait for the special glue to dry), stick it to the leakage point, and the adhesion is tight. If the leakage is caused by the opening of glue at the hot sealing joint of the gas column, the following steps can be taken to handle it:

1. Clean the bonding surface first.

2. Inflatable tents are equipped with bottles of glue, which is a special adhesive for inflatable tent air columns. It must be applied evenly and with a suitable thickness on the pre bonding surface. After brushing the picture twice, it can be bonded.

3. The shape of the adhesive interface should be designed as circular or elliptical, avoiding square and sharp angle interface shapes as much as possible, and the overlap width should not be less than 30mm.

4. After the glue evaporates completely, it can be bonded. The patch must be flat and free of wrinkles. It should be rolled and scraped flat, and a hair dryer should be used to supply a heat source for easy bonding. After 6 hours of bonding, it can be inflated and used.

Take care

1. When installing on mud or sand, it is necessary to lay a layer of tarpaulin flat on the ground to prevent the inflatable tent from getting dirty, affecting its appearance and service life.

2. If cooking inside a tent, be sure to keep the flames away from the tarpaulin or use fire-resistant boards to isolate the flames. During cooking, people should not leave the tent, and a fire extinguishing plan should be prepared in advance. Exhaust fans should be installed to eliminate oil fumes.

3. Please remove the inflatable tent in advance when the local wind force exceeds level eight. To avoid unnecessary losses.

4. Before storing an inflatable tent, be sure to sun dry or air dry the tarpaulin. After it returns to dryness, fold and store it. If it is not possible to cool down the tarpaulin in time, remember not to store it for a long time to avoid discoloration and mold.

5. Depending on the local humidity and climate conditions, regularly air dry the tarpaulin to prevent the growth of bacteria and damage to the rainproof coating of the outer tarpaulin.